KNT UBEC 6 amp

A Highly efficient switch mode power supply that will give 5 or 6 volts output at a constant 6 amps (peak 8 amp) from an input of between 7 and 25.5 volts

This unit has standrad 2 pole radio power input plug and standard futaba typ servo plug on the output. It can be used to safely power you receiver but it is capable of higher supplies.

Use this unt where you have high loads that exceed your ESC's standard BEC output.

specifications:
Input: 7-25.5 volts
output: 5 or 6 volts ( jumper selectable
Output current: 6 amps (amx peak 8 amps)