Trailers, Kits and parts

Trailer kits for Tamiya Trucks. Complete trailer kits in 1/14th scale for Tamiya trucks

AsTec bearing kit 2 axle trailer
AsTec bearing kit 2 axle trailer
£3.24
bearing kit for tamiya 2 axle trailer kit.
AsTec bearing kit 3 axle trailer
AsTec bearing kit 3 axle trailer
£4.92
bearing kit for tamiya 2 axle trailer kit.
Carson 907362 king pin
Carson 907362 king pin
£8.50
Carson King pin for Carson/Tamiya trailers
DMW 023 - chassis mount toolbox
DMW 023 - chassis mount toolbox
£17.40
DMW - chassis mount toolbox
DMW 055x - chassis mount Equipment Box
DMW 055x - chassis mount Equipment Box
£27.00
DMW - chassis Equipment Box
DMW 999 lowloader trailer - RED
DMW 999 lowloader trailer - RED
£1,803.00
OAL: 1280mm, height :170mm, ground clearance: 13mm, width: adjustable 197 to235mm. weight: 7kg, load limit: 30kg. It is recommended to use 2 s (7.4v) 1500 MAH 25C lithium battery. Notes: 1. It is suggested that the electric adjustment of screw motor should not raise and lower at full throttle. Due to the electric adjustment developed by ourselves, the heat dissipation and current should be reserved. When the full throttle is turned on, it is easy to lose the signal and restart the electric adjustment. 2. In the process of driving, it is necessary to pay attention to the retraction and placement of the front jack up steering gear to prevent the steering gear mechanism from standing against the rear girder of the truck, resulting in the burning of the servo steering gear. 3. In the process of driving, when there is a transportation load in the middle, it is strictly prohibited to adjust the width. Otherwise, the width adjustment fails and the width adjustment servo motor burns out. Manual is here http://astecmodels.co.uk/index.php/manuals/40-degree-model-workshop-heavy-haul-trailer The trailer comes in 3 main parts and some wiring and construction is necessary.
DMW 999 lowloader trailer - SILVER
DMW 999 lowloader trailer - SILVER
£1,803.00
OAL: 1280mm, height :170mm, ground clearance: 13mm, width: adjustable 197 to235mm. weight: 7kg, load limit: 30kg. It is recommended to use 2 s (7.4v) 1500 MAH 25C lithium battery. Notes: 1. It is suggested that the electric adjustment of screw motor should not raise and lower at full throttle. Due to the electric adjustment developed by ourselves, the heat dissipation and current should be reserved. When the full throttle is turned on, it is easy to lose the signal and restart the electric adjustment. 2. In the process of driving, it is necessary to pay attention to the retraction and placement of the front jack up steering gear to prevent the steering gear mechanism from standing against the rear girder of the truck, resulting in the burning of the servo steering gear. 3. In the process of driving, when there is a transportation load in the middle, it is strictly prohibited to adjust the width. Otherwise, the width adjustment fails and the width adjustment servo motor burns out. Manual is here http://astecmodels.co.uk/index.php/manuals/40-degree-model-workshop-heavy-haul-trailer The trailer comes in 3 main parts and some wiring and construction is necessary.
HH UP0141 Tipper mechanism
HH UP0141 Tipper mechanism
£98.75
Hercules Hobby Complete tipper mechanism for 1/14 scale trucks
HH140403 3 axle Flatbed trailer for tamiya trucks
HH140403 3 axle Flatbed trailer for tamiya trucks
£262.50
1/14 scale 3 axle 45ft flatbed trailer
HH140407 20 ft trailer & container kit
HH140407 20 ft trailer & container kit
£188.12
1/14 scale 20ft container trailer and container for Tamiya Trucks.
Displaying 1 to 20 (of 32 products)
Manufacturers
We Accept