A simulated rotating flashing beacon suitable for 1/10th to 1/14th scale cars, trucks and haulers. An Ideal addition to any heavy haulage outfit etc.
The beacon is round, approx 12mm dia. and 22 mm high. It contains 4 leds which flash in several sequences:
1. slow rotation and flashing
2. fast rotation and flashing
3. solid flash on all 4 elements.
The unit can be run directly from a receiver supply and has a 2 pin RX power connector.
For the avoidance of confusion a Receiver power supply is one suitable for a Receiver - normally sourced from a BEC in the MFU or ESC or Receiver battery pack. Direct supply from the Main motor will result in failure or short life
Fitting tip: remove the bottom plate and use it to secure inside/ under the surface so it is hidden from view. This makes the beacon look less bulky.
Tip 2: The control unit for this and other rotating single beacons can be used to power discrete LED's using the centre red wire as positive. No resistors are needed.
We are happy for you to return items, however they must be in their original packaging and in a resaleable condition. We will NOT pay return postage unless the item is faulty
If the item is faulty then we are very happy to replace it and will pay the return costs IF we find it to be faulty and NOT due to user error.
In either case please contact us first