FZ RC flashing beacon bar SQUARE - AMBER

$11.22

Product may vary slightly from image representation.
Live Stock Check: 41 units
Qty:
An AMBER LED flashing beacon bar, square form, for rc trucks crawlers or cars.

Size is 105mm x18mm x 25mm high.

Quad flashing beacons flash in 7 sequences. The first is a demo sequence and the default display - it runs through all the available sequences except full on and off. This is followed by 4 sequences. these are follwed by an all leds on and then an all leds off. The next sequence after this is the demo sequence. This requires a full channel i.e. changing from 1.2ms to 1.8 ms ( normal full throw)

The base can be removed to lower the height.

Requires 4.8 to 6 volt supply so will run directly from a receiver power supply.

Comes with RX futaba type plug.

For the avoidance of confusion a Receiver power supply is one suitable for a Receiver - normally sourced from a BEC in the MFU or ESC or Receiver battery pack. Direct supply from the Main motor will result in failure or short life

square blue beacon bar video here
Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Manufacturer Info
We Accept
Share Product
Share via E-Mail Share on Facebook Share on Twitter