An AMBER LED flashing beacon bar, oval form, for rc trucks crawlers or cars.

Size is 105mm x18mm x 25mm high.

Quad flashing beacons flash in 7 sequences. The first is a demo sequence and the default display - it runs through all the available sequences except full on and off. This is followed by 4 sequences. these are follwed by an all leds on and then an all leds off. The next sequence after this is the demo sequence. This requires a full channel i.e. changing from 1.2ms to 1.8 ms ( normal full throw)

The base can be removed to lower the height.

Requires 4.8 to 7.2 volt supply so will run directly from a receiver power supply.

Comes with RX futaba type plug.

For the avoidance of confusion a Receiver power supply is one suitable for a Receiver - normally sourced from a BEC in the MFU or ESC or Receiver battery pack. Direct supply from the Main motor will result in failure or short life

square blue beacon bar video here
Currencies
Manufacturer Info
Share Product
Share via E-Mail
Share on Facebook Share on Twitter
Quick Find