DMW 103-sc - working wiper set for Tamiya Scania

£29.65

Product may vary slightly from image representation.
Live Stock Check: 2 units
A working screen wiper set for Tamiya scania trucks.

Contains wipers, actuator mechanism and micro servo.

Simulation design, perfect installation, maximum width 3.3mm, very small!

360-degree 9g steering gear drive, through the remote control knob drive, can adjust the speed of the machine wiper!

Installation
Drilling
main hole drilling 4.0-4.5mm, screw hole - do not force the arm through the hole. The weld will break.
4 1mm diameter for retaining screws...

When installing, you will need to clip the edge of the screen support to clear the installation

After the installation is completed, the screws in the inner movable place should be glued together. If not, the screws will fall off easily after a long period of movement. !

The mounting hole of the steering gear rocker arm is the innermost hole of the single-angle rocker arm, which is fixed with m1.2 screws!
Manufacturers
We Accept
Manufacturer Info
Share Product
Share via E-Mail Share on Facebook Share on Twitter