New Products

DMW 015-730jd - Scania Grill with LEDs BLACK
DMW 015-730jd - Scania Grill with LEDs BLACK
£28.68
DMW 015D - An etched stainless steel grill with two LED lights embedded in orange filters
Carson 907362 king pin
Carson 907362 king pin
£8.50
Carson King pin for Carson/Tamiya trailers
DMW 015XB- Scania Grill V8 piston logo R730 silver
DMW 015XB- Scania Grill V8 piston logo R730 silver
£11.40
DMW 015XB- Scania Grill V8 piston logo R730
DMW 132 Beacon Bar
DMW 132 Beacon Bar
£49.20
An RC controlled flashing Beacon bar. The bar is of flat form and has Fifteen flash modes, six color modes. CNC Metal shell.
DMW 015X - Scania Grill V8 piston logo R620/470 black
DMW 015X - Scania Grill V8 piston logo R620/470 black
£11.40
DMW - Scania Grill V8 piston logo R620/470 black
DMW 073 Trailer hitch
DMW 073 Trailer hitch
£45.18
A CNC cut trailer hitch and mounting plate. This was designed specifically for the Tamiya Volvo log truck but should be useable on other models
DMW 076-3 Scania Lowbar
DMW 076-3 Scania Lowbar
£32.86
A lowbar for Scania R470/R620. Supplied complete with LEDS with Car lighting system plugs. Includes l&r incicators in orange.
DMW 089 - Illuminated Headboard
DMW 089 - Illuminated Headboard
£26.71
DMW 089 - Headboard lightbox with white and blue led sets
DMW 085-8 - sunvisor spotlight bar
DMW 085-8 - sunvisor spotlight bar
£59.59
DMW 085 - 8 - sunvisor spotlight bar.
DMW 085-7 - sunvisor spotlight bar
DMW 085-7 - sunvisor spotlight bar
£59.59
DMW 085 - 7 - sunvisor spotlight bar.
DMW 075-V8-R post marker light
DMW 075-V8-R post marker light
£24.98
A pair of post mount marker lights in RED Although these were designed to fit the Tamiya Scania front step these are much more versatile and can be used on the T cab, US trucks and trailers. supplied as a pir of pr-wired LED lights with lenses, all mounting hardware and resistors.
DMW 076-2-22 Bull/spot/low bar for Scania
DMW 076-2-22 Bull/spot/low bar for Scania
£45.60
A cnc machined combined bull/low bar and spotlight bar for Tamiya Scania trucks. This will fit both Cabover and Tcab versions
FZ Aluminium screw tray
FZ Aluminium screw tray
£2.16
FZ Aluminium screw tray An aluminium tray with magnetic insert and padded feet approx 10cmx8cm The tray has a magnetic pad that fits internally to hold steel screws in place OR externally to hold the tray to a magnetic surface.
FZ Deans 2 way splitter short 1 batt 2 outputs
FZ Deans 2 way splitter short 1 batt 2 outputs
£1.19
A power splitter that gives on battery input and two outputs using deans style connectors
Beier UAT1 universal output driver
Beier UAT1 universal output driver
£17.45
With the universal output driver UAT-1, loads with a high current consumption (such as motors, lamps, pumps, smoke generators, etc.) can be switched (up to 4 A). The UAT-1 can be used if the current of an existing switching output is not sufficient for the connected load. The universal output driver UAT-1 is usually controlled by the negative-switching outputs of our sound modules, speed controllers or multiswitch modules. The advantage over other switching modules is that with UAT-1 even changing intensities (0 - 100%) can be switched with a high current. Thus, for example, stronger smoke generators or pumps can be connected to the switching outputs of our sound modules and speed controllers and still be regulated in the intensity
Beier SFR1 standby switch
Beier SFR1 standby switch
£4.80
The standby switch is plugged into connector X9 of sound speed controller SFR-1. When the standby switch is closed, the BEC voltage of the SFR-1 is switched off and the sound speed controller goes to "standby". The current consumption of the module then drops to a current of only approx. 1 mA. This allows the model to stay on standby for several hours without noticeably draining the battery. However, if the model is not to be used for several days, the battery should be disconnected completely. The standby switch comes with a soldered cable. The cable length is approx. 25 cm.
DMW 129 - Volvo bull bar
DMW 129 - Volvo bull bar
£61.12
DMW 129 - Volvo bull bar A full metal Bull bar with twin spots and LEDs to suit the Tamiya (and perhaps the Verkerk) Volvo FH16 kits. NB external resistors will be required and are dependent on the working voltage.
DMW 130 - Volvo top spot bar
DMW 130 - Volvo top spot bar
£34.22
A CNC machined spot bar and mounts with 4 square form Aluminium cnc cut spots with lenses and led's . squre form LEDs for fitting in the bar. LEDs are all white. NB. If not using a lighting system then resistors will be required. Resistors are required for Beier systems.
Displaying 1 to 20 (of 579 products)
Manufacturers
We Accept